Controlador Temperatura Pirometro Rex-c100 Termocupla + Rele
Descripción del Producto
La rutina de programación de estos pirómetros le permite lograr un control preciso y eficiente de la temperatura. Se puede utilizar tanto para ciclos de calefacción como para refrigeración.
Controlador de temperatura con termostato digital REX-C100FK02-VNNDN, salida SSR, sensor termopar tipo K 48 x 48 + relé sólido SSR 40DA + sensor
(VERSION SIN FUNCION DE ALARMA INTERNA)
TRADUCE LAS SIGUIENTES ESPECIFICACIONES AL ESPAÑOL DEJANDO IGUAL E IDENTICO TODA LA INFO: REX-C100 digital thermostat temperature controller SSR output K type thermocouple sensor 48 x 48 +SSR 40DA solid relay+sensor
Specifications:
1.Thermostat
Measuring accuracy: ±0.5%FS
Cold-end compensation tolerance: ±2 ( can be modified by software in 0~50 )
Resolution: 14 bit
Sampling cycle: 0.5 Sec
Dimensions:48 x 48 x 88 (mm) ±0.2mm
Process value (PV), Setting value (SV)
Output can be indicated by: LED
Self-tuning control
output: contact capacity 250V AC 3A (resistive load
Contact capacity of output: 250V AC 3A (resistive load)
Setting value (SV): identical to measuring range (PV)
Proportional band (P): 0~full range (ON/OFF control when set to 0)
Integral time (I): 0~3600 sec (No integral action when set to 0)
Derivative time (D): 0~3600 sec (No derivative action when set to 0)
Heat-reset proportional cycle: 1~100 sec
temperature range: 0 to 400
Insulation resistance: >50M ohm(500V DC)
Insulation resistance: 1500V AC/min
Power Consumption: 10 VA
Service environment: 0~50,
environment with no corrosive gas 30~85% RH
K Type Probe Sensor :
Cable Length: 1M
Sensor diameter:4.5mm
Temperature rang :0-600
Internal Insulation: Fiberglass
External Shielding: Insulated Shielding
SSR 40DA Solid state relay
1.Output Current:40A
2.Input Voltage:DC 3-32V
3.Output Voltage:24-380V AC
4.Output Voltage Range:Standard Type